Collection of outdoor lighting units with a rigorous, minimal design and LED light source. May be combined with the wall versions in the same collection. Single- and dual-direction bollards are available in two heights and two sizes based on the light source and required intensity. The rigid frame is made of extruded aluminium without visible screws, and the base raises it above the ground for quick, simple installation. Available in different finishes with a double layer of powder coating according to the QUALICOAT standard. The first layer of epoxy powder confers chemical and mechanical resistance. The second layer, a polyester powder finish, ensures resistance to UV rays and corrosive atmospheric agents. The painted surfaces are treated with alkiline and acid washes, rinsed with demineralized water, and subjected to chemical conversion treatment to protect against rust. The anchoring hardware is made of AISI 316L stainless steel. The diffuser is made of transparent, UV-stabilized polycarbonate. The asymmetric reflecting screen is made of very pure aluminium that has been oxidized and shined. It holds the LED light source in a recessed position to reduce direct glare. The Bollard versions may be easily installed on any flooring on the ground with anchors, or with the dedicated anchoring plate accessory to completely integrate the base of the product with the pavement. LED light source included. Integrated 220-240V ON/OFF electrical power. Equipped with a length of neoprene cable and an IP68 2-way anti-condensation H2O stop seal system. The device may be installed on any flooring with anchors. Anchoring plate for installation on flooring laid over concrete sold separately. 110V version upon request.
We deliver at your area code.Free Installation Offer
You are entitled to a free installation offer of lights purchased! Limited time period offer.Delivery Not Available
We regret to inform you that currently we are not delivering at your area code. However, we appreciate your visit and compliment you on your choice of collection. We would be glad to assist you with an alternate delivery option if possible. Request you to call us at +91 11 26809377 or email us at email@example.com
Product is not available for this variant, please select another variant.
|Name||Mile Bollard 1900 Mono|
|Product Code||F015H21A018 + F015Z000000|
|Indoor / Outdoor||Outdoor|
|Net Weight||2.7 Kg|
|Dimensions||Lamp Length: 5.90 inch, Lamp Width: 4.72 inch, Lamp Overall Height: 35.43 inch.|
|Material||The anchoring hardware is made of AISI 316L stainless steel. The diffuser is made of transparent, UV-stabilized polycarbonate. The asymmetric reflecting screen is made of very pure aluminium|